The Bionic Wrench® is a remarkable patented hybrid of an adjustable wrench with the ease of use of a pair of pliers. In addition, the genius of attacking a bolt/nut on all 6 flat sides removes the stress and strain on the corners of the bolt. This coupled with the superior gripping action of the jaws, allows the user to complete their work without the wrench slipping off and damaging the bolt. The design of the Bionic Wrench® multiplies your hand’s gripping force, so you can more easily tighten/loosen bolts. You can develop ratchet-like speed by fully turning the Bionic Wrench®, release the grip while still on the bolt, reposition wrench, tighten grip-repeat until finished.
Thanks for stopping by the Bridgeway Products and Equipment’s youtube site- No more time wasted fumbling around with wrenches that have to be removed and repositioned over and over and over and… Now with the Ratcheteers patented time-saving design, you’re always in contact and ready in a “click.” Ideal for nuts, bolts, CGA connections, HVAC, numerous fastener con- figurations in welding, plumbing, pneumatics, electrical, auto, farm, home and more. Makes old style 8″ and 10″ adjustable wrenches obsolete! Saves considerable time and effort. Streamlined jaws for better access.
This Tool Cleaned the Competitons Clock. I want to thank the competitors for making a tool that is so easy to compete against. The competitons quality is horrible, it makes my job easier!!
TITANS Patened Auto tensioner has a electric, or hydraulic motor. This motor will automatically wind the bolt down at the same time the bolt is tensioned!! Can be operated via remote controlled for nose cone tensioning in windmills!!!
Why use a Pneutorque® Pneumatic Torque Multiplier? Hand operated torque multipliers are ideal for low volume or intermittent use or when there is no power source available. However, for production lines or whenever a large number of bolts are involved, a powered multiplier will save a considerable amount of time. Pneutorque® operating is quiet. Less than 85dB(A) with absolutely no impacting. These two factors make Pneutorque® comfortable for the operator to use, reducing fatigue and consequently increasing safety.
Mole Wrench How and why? A Mole wrench is a useful tool it has a powerful grip and is able to be latch-on to objects holding and gripping them hands free. This is a good tool for diy, do it yourself. www.acomputerportal.com Recorded using Instant Video Suite:- www.acomputerportal.com Finalised using Windows Movie Maker.
The shop manual shows the use of a special "pulley wrench" like the one in the photo below (see link below) in which the bolts on the outside of the pulley are tightened onto the arms of the wrench and then this wrench is used in conjunction with a breaker bar to remove the inner bolt.
Anyway, nobody near me seems to carry this pulley wrench. If we try to remove the bolt without it, the camshaft just turns along with the breaker bar. We need a way to hold the pulley (from the top, not the outside) that will keep it from turning while we use the breaker bar to remove the large bolt in the center holding it on.
Any (reasonable) ideas other than taking it to a repair shop? We want to do this ourselves.
HYDRAULIC TORQUE WRENCH on site by TITAN. This TITAN LP-16 is turning a hydrostatic testing rig in New Jersey. It is operated by a air operated plus series pump, and the tool has the TITAN alco arm attached to it.
Is a torque wrench absolutely needed? A regular wrench with correct socket is OK? If a torque wrench is absolutely needed, what are the torque specs for my transmission pan bolts. My vehicle: A Toyota Tacoma, 2000, 2.4 lit, 2wd. Thanks
It is a 4×4. I had the wheels off and couldn’t find a wrench or an allan wrench to fit any of the hardware. Is it metric, or just "off sized"
I think that the bolts may be 23/32 but I am not sure, none of my allan wrenches fit either. Does anyone know what size? May be metric. If you can help me with this, I can go buy the tools and save 0 in labor.